DumpObjectsProblem

Single purpose problem object that does not run the given input but allows deconstructing actions into their series of underlying Moose objects and variables.

Run any input file overriding the Problem/type parameter to DumpObjectsAction and setting the Problem/dump_path parameter to the full _hit_ input file syntax path of an action to dump the individual Moose objects and variables created by the action.

After the parse and setup stage the DumpObjectsProblem will not execute the input any further. Any objects created and parameters set by the selected action will be dumped to the screen and Moose will halt execution.

Example

The input file two_block_new.i is a test for the TensorMechanics master action, an action that sets up (aux)variables, (aux)kernels, and materials for mechanics probems. Let's see if we can examine what exactly a particular action block ([./block2]) in this file sets up.

Compile the tensor_mechanics module executable and run


./tensor_mechanics-opt -i test/tests/action/two_block_new.i Problem/type=DumpObjectsProblem Problem/dump_path=Modules/TensorMechanics/Master/block2

You should obtain the output


[AuxKernels]
  [./stress_xx_block2]
    type = RankTwoAux
    block = 2
    execute_on = TIMESTEP_END
    index_i = 0
    index_j = 0
    rank_two_tensor = stress
    variable = stress_xx
  [../]
  [./strain_yy_block2]
    type = RankTwoAux
    block = 2
    execute_on = TIMESTEP_END
    index_i = 1
    index_j = 1
    rank_two_tensor = total_strain
    variable = strain_yy
  [../]
[]

[AuxVariables]
  [./stress_xx]
    blocks = '1 2'
    family = MONOMIAL
    order = CONSTANT
  [../]
  [./strain_yy]
    blocks = '1 2'
    family = MONOMIAL
    order = CONSTANT
  [../]
[]

[Kernels]
  [./TM_block20]
    type = StressDivergenceTensors
    block = 2
    component = 0
    displacements = 'disp_x disp_y'
    use_displaced_mesh = true
    variable = disp_x
  [../]
  [./TM_block21]
    type = StressDivergenceTensors
    block = 2
    component = 1
    displacements = 'disp_x disp_y'
    use_displaced_mesh = true
    variable = disp_y
  [../]
[]

[Materials]
  [./block2_strain]
    type = ComputeFiniteStrain
    block = 2
    displacements = 'disp_x disp_y'
  [../]
[]

[Variables]
  [./disp_x]
    blocks = '1 2'
  [../]
  [./disp_y]
    blocks = '1 2'
  [../]
[]

which is what the

[Modules/TensorMechanics/Master]
  [Modules/TensorMechanics/Master]
    [Modules/TensorMechanics/Master]
      # parameters that apply to all subblocks are specified at this level. They
      # can be overwritten in the subblocks.
      add_variables = true
      strain = FINITE
      generate_output = 'stress_xx'

      [./block1]
        # the `block` parameter is only valid insde a subblock.
        block = 1
      [../]
      [./block2]
        block = 2
        # the `additional_generate_output` parameter is also only valid inside a
        # subblock. Values specified here are appended to the `generate_output`
        # parameter values.
        additional_generate_output = 'strain_yy'
      [../]
    []
  []
[]

block in this input file creates.

The AuxVariables and AuxKernels are triggered by the generate_outputs parameter, the Kernels are informed by the choice of coordinate system, as is the finite strain calculator material.

Note that this particular action creates Moose objects only for the selected blocks, while it sets up Moose variables for the set union of all blocks handled by the action.

Input Parameters

dump_pathSyntax path of the action of which to dump the generated syntax
C++ Type:std::string
Controllable:No
Description:Syntax path of the action of which to dump the generated syntax

Required Parameters

boundary_restricted_elem_integrity_checkTrueSet to false to disable checking of boundary restricted elemental object variable dependencies, e.g. are the variable dependencies defined on the selected boundaries?
Default:True
C++ Type:bool
Controllable:No
Description:Set to false to disable checking of boundary restricted elemental object variable dependencies, e.g. are the variable dependencies defined on the selected boundaries?
boundary_restricted_node_integrity_checkTrueSet to false to disable checking of boundary restricted nodal object variable dependencies, e.g. are the variable dependencies defined on the selected boundaries?
Default:True
C++ Type:bool
Controllable:No
Description:Set to false to disable checking of boundary restricted nodal object variable dependencies, e.g. are the variable dependencies defined on the selected boundaries?
error_on_jacobian_nonzero_reallocationFalseThis causes PETSc to error if it had to reallocate memory in the Jacobian matrix due to not having enough nonzeros
Default:False
C++ Type:bool
Controllable:No
Description:This causes PETSc to error if it had to reallocate memory in the Jacobian matrix due to not having enough nonzeros
extra_tag_matricesExtra matrices to add to the system that can be filled by objects which compute residuals and Jacobians (Kernels, BCs, etc.) by setting tags on them.
C++ Type:std::vector<TagName>
Controllable:No
Description:Extra matrices to add to the system that can be filled by objects which compute residuals and Jacobians (Kernels, BCs, etc.) by setting tags on them.
extra_tag_solutionsExtra solution vectors to add to the system that can be used by objects for coupling variable values stored in them.
C++ Type:std::vector<TagName>
Controllable:No
Description:Extra solution vectors to add to the system that can be used by objects for coupling variable values stored in them.
extra_tag_vectorsExtra vectors to add to the system that can be filled by objects which compute residuals and Jacobians (Kernels, BCs, etc.) by setting tags on them.
C++ Type:std::vector<TagName>
Controllable:No
Description:Extra vectors to add to the system that can be filled by objects which compute residuals and Jacobians (Kernels, BCs, etc.) by setting tags on them.
force_restartFalseEXPERIMENTAL: If true, a sub_app may use a restart file instead of using of using the master backup file
Default:False
C++ Type:bool
Controllable:No
Description:EXPERIMENTAL: If true, a sub_app may use a restart file instead of using of using the master backup file
fv_bcs_integrity_checkTrueSet to false to disable checking of overlapping Dirichlet and Flux BCs and/or multiple DirichletBCs per sideset
Default:True
C++ Type:bool
Controllable:No
Description:Set to false to disable checking of overlapping Dirichlet and Flux BCs and/or multiple DirichletBCs per sideset
ignore_zeros_in_jacobianFalseDo not explicitly store zero values in the Jacobian matrix if true
Default:False
C++ Type:bool
Controllable:No
Description:Do not explicitly store zero values in the Jacobian matrix if true
kernel_coverage_checkTrueSet to false to disable kernel->subdomain coverage check
Default:True
C++ Type:bool
Controllable:No
Description:Set to false to disable kernel->subdomain coverage check
material_coverage_checkTrueSet to false to disable material->subdomain coverage check
Default:True
C++ Type:bool
Controllable:No
Description:Set to false to disable material->subdomain coverage check
material_dependency_checkTrueSet to false to disable material dependency check
Default:True
C++ Type:bool
Controllable:No
Description:Set to false to disable material dependency check
near_null_space_dimension0The dimension of the near nullspace
Default:0
C++ Type:unsigned int
Controllable:No
Description:The dimension of the near nullspace
null_space_dimension0The dimension of the nullspace
Default:0
C++ Type:unsigned int
Controllable:No
Description:The dimension of the nullspace
parallel_barrier_messagingFalseDisplays messaging from parallel barrier notifications when executing or transferring to/from Multiapps (default: false)
Default:False
C++ Type:bool
Controllable:No
Description:Displays messaging from parallel barrier notifications when executing or transferring to/from Multiapps (default: false)
previous_nl_solution_requiredFalseTrue to indicate that this calculation requires a solution vector for storing the prvious nonlinear iteration.
Default:False
C++ Type:bool
Controllable:No
Description:True to indicate that this calculation requires a solution vector for storing the prvious nonlinear iteration.
restart_file_baseFile base name used for restart (e.g. / or /LATEST to grab the latest file available)
C++ Type:FileNameNoExtension
Controllable:No
Description:File base name used for restart (e.g. / or /LATEST to grab the latest file available)
skip_additional_restart_dataFalseTrue to skip additional data in equation system for restart. It is useful for starting a transient calculation with a steady-state solution
Default:False
C++ Type:bool
Controllable:No
Description:True to skip additional data in equation system for restart. It is useful for starting a transient calculation with a steady-state solution
skip_nl_system_checkFalseTrue to skip the NonlinearSystem check for work to do (e.g. Make sure that there are variables to solve for).
Default:False
C++ Type:bool
Controllable:No
Description:True to skip the NonlinearSystem check for work to do (e.g. Make sure that there are variables to solve for).
solveTrueWhether or not to actually solve the Nonlinear system. This is handy in the case that all you want to do is execute AuxKernels, Transfers, etc. without actually solving anything
Default:True
C++ Type:bool
Controllable:Yes
Description:Whether or not to actually solve the Nonlinear system. This is handy in the case that all you want to do is execute AuxKernels, Transfers, etc. without actually solving anything
transpose_null_space_dimension0The dimension of the transpose nullspace
Default:0
C++ Type:unsigned int
Controllable:No
Description:The dimension of the transpose nullspace
use_nonlinearTrueDetermines whether to use a Nonlinear vs a Eigenvalue system (Automatically determined based on executioner)
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether to use a Nonlinear vs a Eigenvalue system (Automatically determined based on executioner)
verbose_multiappsFalseSet to True to enable verbose screen printing related to MultiApps
Default:False
C++ Type:bool
Controllable:No
Description:Set to True to enable verbose screen printing related to MultiApps

Optional Parameters

control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
default_ghostingFalseWhether or not to use libMesh's default amount of algebraic and geometric ghosting
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to use libMesh's default amount of algebraic and geometric ghosting
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:No
Description:Set the enabled status of the MooseObject.

Advanced Parameters

References

No citations exist within this document.

(../../../SoftwareDownloads/moose/modules/tensor_mechanics/test/tests/action/two_block_new.i)

[Mesh]
  [generated_mesh]
    type = GeneratedMeshGenerator
    dim = 2
    nx = 4
    ny = 4
  []
  [block1]
    type = SubdomainBoundingBoxGenerator
    block_id = 1
    bottom_left = '0 0 0'
    top_right = '0.5 1 0'
    input = generated_mesh
  []
  [block2]
    type = SubdomainBoundingBoxGenerator
    block_id = 2
    bottom_left = '0.5 0 0'
    top_right = '1 1 0'
    input = block1
  []
[]

[GlobalParams]
  displacements = 'disp_x disp_y'
[]

[Modules/TensorMechanics/Master]
  # parameters that apply to all subblocks are specified at this level. They
  # can be overwritten in the subblocks.
  add_variables = true
  strain = FINITE
  generate_output = 'stress_xx'

  [./block1]
    # the `block` parameter is only valid insde a subblock.
    block = 1
  [../]
  [./block2]
    block = 2
    # the `additional_generate_output` parameter is also only valid inside a
    # subblock. Values specified here are appended to the `generate_output`
    # parameter values.
    additional_generate_output = 'strain_yy'
  [../]
[]

[AuxVariables]
  [./stress_theta]
    order = CONSTANT
    family = MONOMIAL
  [../]
  [./strain_theta]
    order = CONSTANT
    family = MONOMIAL
  [../]
[]

[AuxKernels]
  [./stress_theta]
    type = RankTwoAux
    rank_two_tensor = stress
    index_i = 2
    index_j = 2
    variable = stress_theta
    execute_on = timestep_end
  [../]
  [./strain_theta]
    type = RankTwoAux
    rank_two_tensor = total_strain
    index_i = 2
    index_j = 2
    variable = strain_theta
    execute_on = timestep_end
  [../]
[]

[Materials]
  [./elasticity_tensor]
    type = ComputeIsotropicElasticityTensor
    youngs_modulus = 1e10
    poissons_ratio = 0.345
  [../]
  [./_elastic_stress1]
    type = ComputeFiniteStrainElasticStress
    block = 1
  [../]
  [./_elastic_stress2]
    type = ComputeFiniteStrainElasticStress
    block = 2
  [../]
[]

[BCs]
  [./left]
    type = DirichletBC
    boundary = 'left'
    variable = disp_x
    value = 0.0
  [../]
  [./top]
    type = DirichletBC
    boundary = 'top'
    variable = disp_y
    value = 0.0
  [../]
  [./right]
    type = DirichletBC
    boundary = 'right'
    variable = disp_x
    value = 0.01
  [../]
  [./bottom]
    type = DirichletBC
    boundary = 'bottom'
    variable = disp_y
    value = 0.01
  [../]
[]

[Debug]
  show_var_residual_norms = true
[]

[Executioner]
  type = Steady

  petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
  petsc_options_value = '  201               hypre    boomeramg      10'

  line_search = 'none'

  nl_rel_tol = 5e-9
  nl_abs_tol = 1e-10
  nl_max_its = 15

  l_tol = 1e-3
  l_max_its = 50
[]

[Outputs]
  exodus = true
[]

Example
Input Parameters
References