- prop_namesThe names of the properties this material will have
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:The names of the properties this material will have
- prop_valuesThe values associated with the named properties
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:Yes
Description:The values associated with the named properties
MFEMGenericConstantMaterial
Summary
Declares constant material properties based on names and values prescribed by input parameters.
Overview
MFEMGenericConstantMaterial defines one or more scalar material properties with constant values on one or more subdomains of the mesh, given by the blocks parameter if provided, or applied to the entire mesh if missing. The scalar material properties are named according to members in the prop_names parameter, with respective (constant) values given by the members of prop_values.
Example Input File Syntax
[Materials]
[Substance]
type = MFEMGenericConstantMaterial
prop_names = 'thermal_conductivity volumetric_heat_capacity'
prop_values = '1.0 1.0'
[]
[]
Input Parameters
- blockThe list of blocks (ids or names) that this object will be applied to. Leave empty to apply to all blocks.
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied to. Leave empty to apply to all blocks.
- execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
- force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
- force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
- force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
Input Files
- (test/tests/outputs/datacollections.i)
- (test/tests/transfers/multiapp_copy_transfers/mfem_linear_lagrange_between_subapps/sub_send.i)
- (test/tests/transfers/multiapp_copy_transfers/mfem_linear_lagrange_from_sub/sub.i)
- (test/tests/kernels/curlcurl.i)
- (test/tests/kernels/diffusion.i)
- (test/tests/transfers/multiapp_copy_transfers/mfem_linear_lagrange_to_sub/parent.i)
- (test/tests/kernels/irrotational.i)
- (test/tests/kernels/graddiv.i)
- (test/tests/kernels/heatconduction_element.i)
- (test/tests/kernels/diffusion_partial.i)
- (test/tests/kernels/heattransfer.i)
- (test/tests/variables/mfem_variables_from_moose.i)
- (test/tests/kernels/linearelasticity.i)
- (test/tests/kernels/heatconduction.i)
- (test/tests/kernels/gravity.i)